Sequoia

The Parrot Sequoia+ sensor is revolutionizing precision farming with an economical solution that is easy to implement on any type of drone.

 

How to calibrate Parrot Sequoia+

 

Calibrating Parrot Sequoia+ is an important step. The multispectral sensor flashes purple when calibration is required.

1. Turn the drone on the axis until the indicator light of the multispectral sensor flashes green.

2. Turn the drone on the axis until the indicator light of the multispectral sensor flashes cyan.

3. Turn the drone on the axis until the indicator light of the multispectral sensor changes color.

 

> NB: Once the calibration is complete, the color of the multispectral sensor indicator light varies according to Parrot Sequoia+'s status. For example, if the memory of the multispectral sensor is full, the indicator light will flash yellow



 

How to use the memory of Parrot Sequoia+

 

If Parrot Sequoia+ detects an SD card, the shots are saved on this SD card. If no SD card is detected, Parrot Sequoia+ automatically saves the shots in the internal memory of the multispectral sensor.

 

What are the lighting specifications of Parrot Sequoia+?

 

General

Quickly flashing orange

Shutting down

Slowly flashing orange

Update in progress

Flashing blue

Enabling/disabling Wi-Fi

 

Problem

Solid red

Hardware malfunction

Flashing red

Corrupted memory. Repair in progress. When the repair is complete, the LED turns green again. This may take several seconds depending on the available space on your SD.

Flashing yellow

Full memory

 

Calibration of the magnetometer

Solid purple

The sensor must be stationary for 1 second.

Flashing purple

The sensor must be calibrated.

Flashing green

Calibration in progress (pitch)

Flashing cyan

Calibration in progress (roll)


Update : 25/02/2019