Skycontroller 2

Fly your PARROT Bebop Pro 3D Modeling with enhanced controls thanks to PARROT SKYCONTROLLER 2. Its two ultra-precise joysticks will significantly enhance your flying experience.

 

Dual Wi-Fi connection, GPS tracking, 180° camera angle, etc. all the features to make Parrot Skycontroller 2 the go-to accessory for flying your PARROT Bebop Pro 3D Modeling!

 

How to charge the battery of Parrot Skycontroller 2

 

To charge the battery of Parrot Skycontroller 2, select the adapter for your country and attach it to the charger. Then, connect the charger cable to Parrot Skycontroller 2 and plug the charger into the power supply.





 

How to connect your tablet or smartphone to Parrot Skycontroller 2

 

This procedure is very simple:

 

1. Screw the mobile device holder to Parrot Skycontroller

2. You can rotate the holder to suit the size of your smartphone. To do this, press on it and rotate it clockwise. Press the right button on the holder to fully open it.

3. Position your smartphone or tablet in the holder.

4. Tighten the holder on your smartphone or tablet.

5. Using the USB cable of your smartphone or tablet, connect your smartphone to Parrot Skycontroller 2's USB port



 

How to connect Parrot Bebop Pro 3D Modeling to Parrot Skycontroller 2

 

1. To connect your Parrot Bebop Pro 3D Modeling to Parrot Skycontroller 2, place your drone on a flat surface.

2. Switch on your Parrot Bebop Pro 3D Modeling.

3. Press the On/Off button of Parrot Skycontroller 2 to switch it on.

4. Wait patiently until the Parrot Skycontroller 2 warning light is continually on green > Now that you are connected to Parrot Bebop Pro 3D Modeling, you can calibrate the drone and set the Wi-Fi®.



 

What are the lighting specifications of Parrot Skycontroller 2?

 

Flashing red

Parrot Skycontroller 2 is trying to connect to a drone.

> Make sure your drone is on.

Or

The battery charge of Parrot Skycontroller 2 or the drone is low.

> Recharge the battery.

Or

Parrot Skycontroller 2 has detected a problem with the drone.

> Go to the Support section at www.parrot.com

Solid green

Parrot Skycontroller 2 is connected to the drone.

> You can fly the drone.


Update : 26/02/2019